Now I will share to you , easy way to overclock GPU from AMD RX480 Using Radeon Setting Wattman.
Default GPU-Z
1. Open Radeon Setting
2. Go to Gaming - Global Setting - Global Wattman ( I Recomended You to use 1080p Monitor To make it easy view Wattman Setting
3. There is 3 main Spot that you have to understand ( GPU, Memory, Power Limit)
4. In GPU, Focus in STATE 7 only. To Change the frequency, make the switch on left to "Dynamic" and the bottom of the frequency switch is voltage switch, Change voltage to manual if you will be fine tuning your voltageand concern about power ( i hope not).
Default 1340Mhz
Push To 1400Mhz
5. After touching GPU, now move to Memory. the same way like in GPU, make frequency Dynamic. but tis is not in STATE 7. but in STATE 1
Default 2000Mhz
Push To 2100Mhz
6. You Must set Power limit. In This Case i set to "50"
7. Apply This Setting. I dont know your GPU can reach my setting or not.but this is how to Overclock..you can explore your GPU setting up to you.
GPU-Z Overclocked
Thanks For Reading And See you Next Time In Another Guide